Brand |
AUO |
Model |
DV236FBM-N00 |
||
Diagonal Size |
23.6 inch |
Type |
a-Si TFT-LCD , LCM |
||
Pixel Format |
1280(RGB)×1280 |
Configuration |
RGB Vertical Stripe |
||
Active Area |
599.424(W)×599.424(H) mm |
Outline Dim |
657 × 657 × 29.15 (H×V×D) |
||
Interface Type |
LVDS (1 ch, 8-bit) |
Treatment |
Antiglare (Haze 25%) |
||
Luminance |
1500 cd/m² (Typ.) |
Contrast Ratio |
1000 : 1 (Typ.) (TM) |
||
Frame Rate |
60Hz |
Light Source |
WLED , 50K hours , With LED Driver |
||
Viewing Angle |
89/89/89/89 (Typ.)(CR≥10) |
||||
Environment |
Storage Temp.: -20 ~ 60 °C Operating Temp.: 0 ~ 50 °C |
||||
CPU |
RK3288 |
Running memory |
2G DDR3 (4G optional) |
Built-in storage |
Standard 8G internal storage (8G/16G/32G optional) |
External storage |
External TF memory card up to 64G can be connected |
Display interface |
Support LVDS, HDMI, EDP, maximum support 3840*2160 resolution |
Display power supply |
3.3V (screen below 15 inches)/5V (screen from 17 to 24 inches)/12V (screen above 26 inches) |
touch screen |
Support USB interface touch screen, while providing I2C interface |
The internet
|
Gigabit wired network port |
Support 2.4G wireless network access |
|
Support Bluetooth access |
|
Support 3G/4G wireless module, support all Netcom modules of China Mobile, China Unicom and China Telecom |
|
camera |
USB interface camera, up to 500W pixel resolution |
Timing clock |
Support timer switch function |
Software monitoring |
Monitoring of specific applications can be achieved through settings or software interfaces to ensure normal and stable operation of applications |
interface |
Support USB touch screen, USB camera, keyboard, mouse, USB mobile hard disk, etc. |
Support infrared remote control and external two-color light status display. |
|
Support LVDS, HDMI, EDP display interface, maximum support 4K*2K output |
|
Support I2S audio output interface, I2C touch screen interface. |
|
7 USB (1 OTG -microUSB, 4 pin type, two standard socket USB) |
|
3 serial ports (One TTL serial port, two RS232 serial ports), 1 I2C interface, SATA hard disk interface, a set of 4 GPIO ports for external reserved control |
|
External TF card, maximum support 64G |
|
Audio power amplifier output, 8Ω/2*10W |
|
Support American standard or international standard headphone jack (with microphone input) |
CHIPSET |
RTD2483BD(Realtek) |
||
Support LCD Panel |
Interface |
Single/Dual 6/8 bit LVDS |
|
Resolution |
Up to 1920X1080@60Hz |
||
Power |
For board |
12V DC Power Supply |
|
To LCD panel |
3.3V,5V,12V |
||
Management |
Low Power Consumption Mode |
||
Standby |
≤0.5 W |
||
OSD Language |
Simple Chinese、English is default. Other language support customized. |
||
Key functions |
6 keys |
ON/OFF,Menu,Right,Left,Exit,Auto |
|
Video input |
HDMI |
480i,480p,576i,576p,720p 1080i,1080p |
|
VGA |
Analog RGB(0.7Vp-p) V-H SYNC Separator(TTL) |
||
Audio input |
0.2 – 1.5 Vrms |
||
Audio output |
2X6W (8Ω) THD+N<10% |
||
Extend function |
IR control, Brightness Control,On board several type of different firmware(Optional) |
||
Dimension |
107mm(L)*65.5mm(W)*17mm(H) |
||
EN