Select languageCNEN

  

Advetising Decode board

SX-8.6(白底).jpg
  • SX-8.6(白底).jpg

VGA+AV+AV Audio Advertising board support CF/SD/MMC card and USB 2.0 device

Product Type:

SX-8.6(480P)


Applications:

•LCD monitor• Advertising machine• Industrial machine• Security monitor• Display•Projection equipment•Maintenance equipment• Test display LCD screen

分享到:
  • Features
  • Parameters
  • Success Case
  • Related

Product Overview

 

 

This board is a decoding board , superior performance ,Can easily embedded various electronic products, such as the Vehicle Display、LCD TV Set 、advertising machine etc; It not only has a variety of digital multimedia mode playback function, but also have rich external functional interfaces, will make your product can provide comprehensive advantage, can meet the volatile market demand. real product photo  see figure (a) (b)



Product interface

Main interface definition instructions , see figure (a)


J3(2 PIN/PH2.0mm pitch)Power supply Interface

Pin NO.

Definition

Description

1

+12V

Power for SX-8.6(6~15V)

2

GND

Ground




J7(3PIN/PH2.0mm pitch)Reservation IO port

Pin NO.

Definition

Description

1

+5V

+5V

2

GND

GND

3

AUX2

Reservation


J5(8PIN/PH2.0mm pitch)Keyboard Interface

Pin NO.



Definition

Description

1

K1

Key 1

2

K2

Key 2

3

K3

Key 3

4

K4

Key 4

5

K5

Key 5

6

K6

Key 6

7

K7

Key 7

8

K8

Key 8

9

K9

Key 9

10

K10

Key 10

11

GND

Ground





 J4(9PIN/PH2.0mm pitch) Audio and AV signal output

Pin NO.

Definition

Description

1

AV

AV signal output

2

GND

Ground

3

FL

Audio left channel output

4

FR

Audio right channel output

5

GND

Ground



J2(6PIN/PH2.0mm pitch) VGA or Ypbpr signal output

Pin NO.

Definition

Description

1

U/R

R/ Luminance  signal

2

Y/G

G/Y Chromatism  signal

3

V/B

B/V Chromatism  signal

4

HS

HSYNC signal

5

VS

VSYNC signal

6

GND

Ground



J1(3PIN/PH2.0mm pitch)Remote control receiver

Pin NO.

Definition

Description

1

+5V

+5V for IR sensor

2

GND

Ground

3

IR

IR signal input


Product Features Description

1、Use the fourth-generation of ESS’s DMPX series chipset: ES6460SBA

2Wide DC input voltage: 6 ~ 15V
3Low power consumption: normal operation mode(<2.4W), standby mode(<1.2W)
4Support various of memory device : Support C/SD/MMC card and USB 2.0 device,support hot swap

Note: USB port not only can use to palying media files , but also can use to update the media files and firmware for SX-8.6 .
5Compatible multi media formats: including MP3,WMA, JPG,JPEG, MPEG(1~4)and other formats
6Video format: PAL (25 frames), NTSC (30 frames), automatic
7Video Output: Support AV, VGA (field frequency of 60Hz, Horizontal Scanning Frequency 31.25kHz) or YPrPb output, and optional output of multiple video at the same time, can be connected to TV set and LCD display, support for 480i, 480p; video 75 ohm output impedance
8Audio output: two-channel stereo audio output , SNR 85dB
9Play mode: Repeat all the files, Repeat current file, Sequential & order playback(Default)

10Play type: All files,Video,Music,Photo, Photo+Background music
11OSD Language: Support Chinese, English .Other languages can be customized
12Remote Control:Support Infrared Remote Control(The best way to control SX-8.6 ) .
13Timer Control: Support setting the on/off time for SX-8.6 . Helping to save energy and prolong service life of SX-8.6
14Break point memory playback : In case of suddenly have a power fail ,SX-8.6 will record the play situation every few seconds and going to play the same point when the power coming again .

15Rolling subtitles: Supports to show some rolling subtitles at the bottom of the screen . Such as : real time news , Notice , advertising ,etc .

16Clock display: a clock IC, time & date information can be show on the screen  
17Support OTG copy function: USB On-The-Go . SX-8.6 will automatic copy the files from USB device to CF/SD card . You can selected cover(Delete all the files and then copy the new files through USB device) or addition (Retain all the files and copy the new files which with different name from USB device).

18、Support Automatic paly : When you trun on the power for SX-8.6 , It will go to playing the meida files automatically.

19、Support Play lists customized :You can use our paly lists software to customized your paly lists .

20、Support Logo function : Booting Logo can be customized .

21、Support OSD rotation : OSD Menu can be rotated 90/270 degree .
22OSD keyboard extension: You can add OSD keyboard to achieve some features .The function of each key can be customized .

23Support OSD Menu lock : You can set a password for OSD Menu .To avoid everybody can enter the OSD Menu to change some setting without permission .

24Support Remote control lock : When you have open this lock . Only “SETUP”button will be effective . Other buttons will be invalid.


PCB dimension figure


PCB:2 layer


PCB length 102.0mm  

PCB width 61.0mm  

Screw holes specifications3.20mm x 4  


















Screw holes specifications3.20mm x 4