Select languageCNEN

  

Video Wall LCD Controller Boar

NT4KM01 V2.0侧面端子_LOGO.jpg
  • NT4KM01 V2.0侧面端子_LOGO.jpg
  • NT4KM01 V2.0反面_LOGO.jpg
  • NT4KM01 V2.0正面_LOGO.jpg

Video Wall LCD controller board support DVI+2HDMI+VGA+DP IN+DP LOOP Out+2RJ45

Product Type:

NT4KM01 V2.0


Applications:

分享到:
  • Features
  • Parameters
  • Success Case
  • Related

GENERAL DESCRIPTION


NT4KM01 V2.0 is a multi-purpose LCD video wall controller board which support various of video signal(DP+2HDMI+DVI+VGA) input and one DP signal loop out .

DVI and VGA input support 1080P , DP and HDMI input support 4K@60HZ .

DP loop out feature support any video signal insert to the board and output to the next boards DP input interface . also it can transmit video wall control signal at the same time . This feature can help to save a video splitter if you have only one video input application and a extra cable for video wall control signal . 

NT4KM01 V2.0 support up to 15X15 video wall system for FHD signal input and 10X10 for 4K signal input . Also with powerful PC Control software .



FEATURES

CHIPSET

RTD2786(Realtek)

Support LCD Panel

Interface#1

Single/Dual 10 bit LVDS

Resolution

Up to 1920X1080@60Hz

Interface#2

8 Lanes V-BY-ONE(Optional)

Resolution

Up to 3840X2160@60Hz

Power

For board

DC12V/5V/5VSB

To LCD panel

5V,12V

Management

Support Standby Mode

OSD Language

English and Chinese is defaulted,

Other language can customize.

Video Input

DP(1.2)

480p,576p,720p,1080p,4K@60HZ

HDMI(2.0)

480p,576p,720p,1080p,4K@60HZ

DVI

480p,576p,720p,1080p

VGA

Analog RGB(0.7Vp-p)

V-H SYNC Separator(TTL)

Optional Features

IR control, RS232 control, Cooling Fan.

Custom key feature , Factory Setting

Multiple Display Mode(Flip 0/90 /180/270 degree )

Adjust backlight brightness(DC dimming mode)

 


FUNCTION LAYOUT

The picture is for a reference only, the actual item is the standard.

 Video Wall LCD controller board support DVI+2HDMI+VGA+DP IN+DP LOOP Out+2RJ45 LCD controller board



PCB MECHANICAL DIMENSION

Video Wall LCD controller board support DVI+2HDMI+VGA+DP IN+DP LOOP Out+2RJ45 LCD controller board


Dimension : 222mm(L)*107mm(W)*18mm(H)
The height of PCB + highest component = 18mm
Screw Holes Size: Φ3.5mm X 4Pcs
Above dimension data only for reference, If you want to make frame/case ,
please remeasure with real board.



 CONFIGURATION & GENERAL PRECAUTIONS
Relative Humidity:≤80%
Storage Temperature:-10~+60℃

Operation Temperature:0~+40℃
Keep away from static places and water Must not be pressed and distortedDo not disassemble the module
Protect it away from contacting with metal or other electric substance